RP-1 Control Processor

This model has been discontinued

RTI's RP-1 Remote Control Processor is a low-cost programmable control system that is designed to automate the operation of audio/video and other electronic systems. It combines many of the capablilities of RTI's more advanced control processors with an integrated RF receiver — all in one small, cost-effective package. The RP-1 is the perfect control system for single room installations such as home theaters, media centers, and bedrooms.

The RP-1 Remote Control Processor is a powerful central controller that is designed for seamless integration with RTI's family of universal remote controls. Unlike simple IR-to-RF converters, the RP-1 stores all system commands and macros where they should be — within a central processor. The RP-1 is a single box solution, receiving RF trigger codes from RTI remotes via the integrated receiver.

The RP-1 Remote Control Processor provides a truly reliable, cost-effective control processor in a small package. It can be combined with any RTI remote control to form a robust control system for almost any home A/V configuration. The RP-1 even comes equipped with a power sensing port to ensure that your system's operation is always reliable and predictable.

NOTE: A 433MHz remote control must be used with this model of control processor. It is not compatible with the 2.4GHz Zigbee® enabled remote controls.

  • Stores all system commands and macros for reliable control
  • Integrated RF receiver
  • Ships with the ECB-5 five-port IR connecting block
  • High-Output infrared port
  • Power sensing input for monitoring equipment status
  • Works with all RTI wireless remotes
  • IR output port incorporates both short-circuit and overload protection
  • RF signal reception LED
  • Seamless programming using Integration Designer software*
  • Non-volatile Flash memory stores your system configuration even when power is not present
  • Field upgradeable firmware (thru the Integration Designer Software)
  • USB programming

*Integration Designer software only available to authorized RTI dealers.

Power Supply +12V DC, 500 mA
Number of Output Ports One (1) High Power IR Port
IR Output Drive 200mA maximum
Infrared Transmission Bandwidth 15kHz - 460kHz
RF Receiver Carrier Frequency 433 MHz
Power Sense Input Off = 0VDC - 2VDC; On = 3VDC - 20VDC
Mounting Wall-mount or free standing
Dimensions (W x H x D) 5.5" (140mm) x 3.3" (84mm) x 1.4" (36mm)
(width dimension does not include antenna or connectors)
Weight 7.0 oz. (198g)
Warranty Three Year (Parts & Labor)