- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
This driver provides TCP control of SunBrite Veranda 4K TVs. This is a one-way driver since the TV provides no status feedback back to the processor. This driver works with all current models of SunBrite TVs.
Version History:
Version 1.1 adds support for logins and support for Signature and Pro 2.
Sunbrite TV
Tested and developed on a Veranda 2nd generation 55" TV
Revision History
1.0 The Initial release of the driver
1.1 Added login support, RAW command, and renamed picture/sound modes for better support on multiple models.
TCP Connection
It is recommended the TV be set with a static IP when using this driver. The default port used by the TV is 4352.
Login
Signiture 2 and Pro 2 TV's now requires a Username and Password to connect, configure this on the TV. Check the box for "Use Authentication" in the driver properties, the default username/password is sunbrite/sunbrite. This will tell the driver to respond to the login prompts correctly.
TV Setup
In order for Power commands to work properly you must have "Quick Start Mode" enabled from the System Menu.
System Variables
All system variables outside of the Power variable are set when you make a change using the driver commands. This means they will not update if control originates outside of the driver.
Set Sleep
The SP XX/V YY shows how long each step will set the sleep timer for the SP side is for Signiture and Pro series TV's, and the V side is for Veranda 2 models.
Set Channel
The Set Channel command format is "000-01" and the range allowed for channel selection is 001-00 to 999-99.