- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
The driver was developed and tested with a Rotel RC-1590 using the v2.0 control protocol.
Please Note: This driver is RS-232 only.
Rotel RC with Control Protocol v2.0
The driver was developed and tested with a Rotel RC-1590 using the v2.0 control protocol.
Revision History
1.0 The Initial release of the driver
Connection Type
RS-232 Connection
Serial Port - Select the serial port on the XP processor which is to be used for serial communications. The RJS-232 connector should be hooked up directly to the serial adapter provided with the RC-1570. A null modem is not needed.
Baud Rate - The baud rate of the RC-1570 is set to 115200 and cannot be changed.
Driver Notes
- In order for Treble, and Bass adjustment to go through to the device properly the Tone Bypass needs to be disabled.
- A RAW driver command has been included for use with any commands not included in the base driver.